VI-3002
- IP/PoE-repeater for UTP cables
- Distances up to 200m
- PoE 802.1af, at and PoE++
- No power supply needed in PoE mode
The VI-3002 is a 10/100Mbps Ethernet and PoE/PoE+/PoE++ repeater. The repeater allows to connect two or more UTP-Cat5/6 cables and thus to multiply the cable distance. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. Due to the small dimensions, the repeaters can also be mounted in very confined spaces.
Product information
Brief description
IP- / PoE-Repeater through UTP cables (paired cables)
Technical data
Copper Ports
2 x 10/100BaseT, RJ45, PoE, PoE+, PoE++
Transmission Cable
Ideal type: Cat5e and superior
Distance Specification
The repeater VI-3002 can transmit more than 100m cable on both sides. By combining several repeaters in a row, even greater distances can be covered. It should be noted that the PoE power decreases due to the voltage drop in the cable and the repeaters' own requirements.
Maximum number of repeaters, guideline values:
Maximum number of repeaters, guideline values:
| PoE Power | Distance | Number of VI-3002 |
| 60W | 130m | 1 |
| 25W | 300m | 2 |
| 5W | 500m | 4 |
Supply Voltage
No separate power supply required due to POE operation.
Power Consumption
1W
Operating temperature
-10°C ... +70°C
Power Loss
34 BTU/h
Dimensions
23 x 25 x 69mm
Weight
Gross weight [kg] 0.053
Net weight [kg] 0.045
Net weight [kg] 0.045
Firmware (FW download)
You need an account to download the firmware. Please log in or register. Registration must be activated by us.
Software (SW-Download)
You need an account to download the software. Please log in or register. The registration must be activated by us.