VI-COAX-2416AB

  • IP/PoE extender for coaxial cable
  • Use on the central side
  • 16 channels
  • Distances up to 500m
  • PoE 802.1af and at
  • No power supply required in PoE operation

The VI-COAX-24xxA series transmits 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 500m. The Pass Through technology makes it possible to pass on the PoE supply of e.g. a midspan directly via a coaxial cable. The units do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the VI-COAX-24xxA series can be mounted as tabletop models, on top-hat rails and in 19" cabinets.

Product information

Brief description

IP / PoE extender via coaxial cable

Systemhinweise

16-port module for connecting sixteen separate extender lines.

Technical data

Copper Ports
16 x 10/100BaseT, RJ45
Extender Ports
16 x coax, BNC
Transmission Cable
50Ohm: RG6, RG58A/U, RG58C/U, RG58U or equivalent 75Ohm: RG59 or equivalent
Distance Specification
The maximum transmission distance when using the cables listed is 500m. When transmitting PoE, the power loss of the transmission path must be taken into account.
Supply Voltage
Power supply 12VDC
Separate power supply VI-0014AB included in the scope of delivery.
The power supply does not insert PoE and is only used to operate the device.
Power Consumption
30W
Operating temperature
-40 to +75°C
Power Loss
34 BTU/h
Weight
Gross weight [kg] 3.916
Net weight [kg] 2.797

Firmware (FW download)

You need an account to download the firmware. Please log in or register. Registration must be activated by us.

Software (SW-Download)

You need an account to download the software. Please log in or register. The registration must be activated by us.

Downloads

Select at least 2 products
to compare

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.